Feature
Programable by Software
Individually control
Conformal coating, PVC glue protection
IP68 waterproof protection rate
Easy installation (punching 9mm hole on metal panel)
50 pieces per string
Specification
Working voltage: DC 5V
Current: 60 mA
Power consumption: 0.3W
LED quantity: 1 piece
LED type: 1 piece of 5mm F5 RGB strawhat LED, smaller than 8mm F8 strawhat LED
Dimension: 9mm small hole, higher resolution than 12mm punching hole
Wire spacing: approx 100mm
The length of this light string is approx 5 meters, the length between each LED is about 10cm.
Working temperature: -40°C~ 60°C
Protection grade: Pls choose,IP65 Waterproof Dripping Glue with 3M Tape on the back
Viewing angle: >90 degrees
Lifespan: MTBF>50000 hours
Applications
Meets the general lighting, environment such as: outdoors advertising, Christmas decoration
RGB pixels are digitally controllable lights you can set to any color, or animate.
Each RGB LED and controller chip is molded into a 'dot' of silicone, the dots are waterproof and rugged.
There are four flanges moulded in so that you can 'push' them into a 9mm drill hole in any material up to 1.5mm/0.06" thick.
They are typically used to make outdoor signs. Compared to our other 20mm LED dots.
These are diffused 5mm LEDs so they are not as bright but they color mix a little nicer.
A 3-conductor cable connects the pixels.
Each dot is digitally controlled, with an internal 5-bit PWM LED driver (15 bit color for 32,768 different shades). The pixels must be clocked by a micro controller.
The pixels use 5mm diffused RGB LEDs with brightness of about 300 mcd per individual R/G/B LED.
Package Included:
1 String of 50pcs WS2811 LED 5V 9mm Addressable RGB Pixel Module Light
CE and RoHS approved